PacificSun LED Lighting Pics & Feedback

[AlohaTropics]

Hey Everyone,

Look for the launch of www.pacificsunusa.com this week. We will have updated pricing and more news of the upcoming Phobos Series!

 

[paintballe48]

hey everyone im in the middle of setting up a 220 gallon tank, started to buy pendants for the tank, now these new led light fixture that are out with the t5s will this replace the mh completly ? or will i still need to run mh? and are these leds just as bright per say ass a 400mh? also i have a 30 inch deep tank woul this penetrate all the way down where i can keep clams, on sand bed or keep sps lower? i guess what im asking is am i limited to what i can keep in the tank?

Im curious on the same thing. Im setting up a 220 or 280 soon just seeing what can fit and i was considering pendants also.

 

[AlohaTropics]

The Pacificsun LED will give you a PAR of around 200 at 24". The 120W unit is equivalent to or more powerful than 400W MH. These are stand alone lights, no other lighting supplement is needed.

 

[rafal07013]

there are two new fixtures coming out:

a) Deimos

b) Phobos

depending on its size 36" 48" 72" it will have either 2 or 3 sets of LED modules plus T5 to supplement. more details to follow shortly.

 

[JonnyIce]

tried some pics with the dslr this time...I probably should do things like turning the pumps off and such, but i'm lazy
Acan (hungryyy) frag up close...24k

some deepwater zoas up close...24k

normal daylight FTS...somewhere around 18k and 50% daylight power

FTS 24k because I like glowy stuff

where are everyone else's photos?!!

 

[KuyaMark]

very nice Johnny!

 

[xavier]

Hi there!

Some photos on my ZeroEdge !

Pacific Sun 90W running at 70% 15000?K

 

[InfernoST]

Nice tank xavier, those led's are proving to be pretty potent. What are the tank dimensions and how high is the fixture above the water?

 

[InfernoST]

tried some pics with the dslr this time...I probably should do things like turning the pumps off and such, but i'm lazy
Acan (hungryyy) frag up close...24k

some deepwater zoas up close...24k

normal daylight FTS...somewhere around 18k and 50% daylight power

FTS 24k because I like glowy stuff

where are everyone else's photos?!!

Your clock is crooked. All kidding aside, looks great.

 

[JonnyIce]

a lot more than that is crooked... thanks!

 

[xavier]

Nice tank xavier, those led's are proving to be pretty potent. What are the tank dimensions and how high is the fixture above the water?

Hi
It's the ZeroEdge 22ZR. The small one. That's why I have the lamp so high (15-16" above the water level) and the power lamp at 70%.
sy

 

[aznt1217]

Do you have to buy a master unit or can you just buy a slave unit?

 

[JonnyIce]

grr...the past couple of days my moonlights havent come on! The sunset happens...and the moonlight intensity is currently at 6 and nothing...blackout...I mess with the moonlight intensity and still nothing...is there a problem with the software? Everytime I click the advanced panel and try to set something, it works, and then when I go back into the settings again later on all my advanced settings disappear...anyone else having this issue??

 

[ecvernon]

do you have the moonlight setting box checked?(the one that asked you date of last full moon)

 

[ecvernon]

if so it could just be following the moons cycles. i have mines turned off i like having the moon light at a constant power of 8

 

[rafal07013]

I bet it is mooncyle thing. i had the same thing and was wondering whats wrong for few days

 

[JonnyIce]

ok...we shall see then...I had moon cycle checked and then every time I connect to the fixture again all my ACP settings are back to default.

 

[pecan2phat]

Anyone using the PAR program for simulated cloud cover?
I have my set for 10 points or 5x a day where it should power down to 50% then back to 100% 15 minutes later.
I can't get it right or it's not working properly. It will cycle down to the 50% at the set times but after a minute, it will cycle back to 100% instead of the 15 minutes. I am talking via email to Leszek about it but he's stumped too since he said that the program screen shot is correct.

 

[AlohaTropics]

Please Note that the lunar cycle will have a new moon every 28 days. That means no light! If you check moon cycle, the % you set above is the max light during the Full Moon. As the phases pass it will dim until you reach the new moon and then back up until the full moon.


Sent from my iPhone using Reefs

 

[rafal07013]

Warren - is the light at 100% or less?

Anyone using the PAR program for simulated cloud cover?
I have my set for 10 points or 5x a day where it should power down to 50% then back to 100% 15 minutes later.
I can't get it right or it's not working properly. It will cycle down to the 50% at the set times but after a minute, it will cycle back to 100% instead of the 15 minutes. I am talking via email to Leszek about it but he's stumped too since he said that the program screen shot is correct.