Tonyscoots84's very long 60 gallon cube tank thread

[Tonyscoots84]

next update DIY Mesh Cover

 

[Tonyscoots84]

redid drain side i started gluing the top part and i was off a little and didnt like the way it looked. here is the updated pic of that and inside the sump area with the j hooks...

 

[Tonyscoots84]

Tunze osmolator coming soon

 

[Tonyscoots84]

hey guys i was wondering with the light hanger i want to make out of 1" emt conduit is there anyway i can have these pipes sit in something on top of the back of the stand. The reason behind this is that i do not want anything on the sides or back of the stand.

 

[TimberTDI]

wall flange- screw to stand and mount emt into it.

BTW- This person used 1/2" EMT to mount his AI light.

 

[fishman1069]

LOL You've gotta be the first person I've seen that is doing the plumbing with the cardboard still on the tank!!!

 

[Tonyscoots84]

Thanks timber exactly what i was looking for...

Fishman unfortunately im going to have no time after i get the house so y not have everything done now while i have time :biggrin:

 

[Tonyscoots84]

picked up the pipe flange at home depot spray painted em and added the set screw 1" connectors to it.

I also bent the pipe and took a pick how its gonna be installed before i install it.

also gotta pick up longer screws for the AI Sol Units

rest to be continued on monday...

 

[Tonyscoots84]

next i gotta figure out what size screw im gonna need for the AI's its gonna be going through the 1" emt pipe into the AI's

 

[Tonyscoots84]

ThinkinG of goin with one radion Instead of the 2 AI desicion time

 

[NewfiDog]

Have you checked out any utube vids on the software for the radions. I find the control of the light to be very nice.

 

[Tonyscoots84]

Yep. Im just not sure which one

 

[skene]

keep the ai's

 

[Tonyscoots84]

yea i think im gonna do that. i wonder if you can buy a replacement shell to change it to black...

 

[skene]

I'm sure you could for the right amount of money... but then again.. you can always sell it and get the black ones.

 

[Tonyscoots84]

I heard jerl wants to buy them :lol2:

 

[Tonyscoots84]

here are the bolts im going to use for the lights to mount it. i was thinking i should put a spacer in between the light and emt conduit something 1/4" or so.. the other bolts are for a piece of pipe im going to put to keep the light rails together with a piece of conduit. i also found ends for the conduit that should work...

 

[nanoreefer22]

Someone's picture crazy!

T you gotta take a picture of some water and put it in this thread, any water, steal someone else's FTS and post it here. I'm at 40 posts per page and we're at 8 pages and a handful of posts away from page 9. smh.

 

[Tonyscoots84]

Dont be haten :yo: :biggrin:

 

[Tonyscoots84]

here is some water for you kris :lol2: