Recent content by marinelife

Hi everyone, I thought I would post about some information about my tank. 375 Gallon Reef Tank Tank Specs: Acrylic 375 Reef Ready 96x30x30 – Set-up on February 25, 2007 Lighting: 120 3w LEDs, I am using Cree XP-G R5 Cool White LEDs and XR-E Royal Blue LEDs. 2 BoostLED Par 30 s with 3 red and...

I am trying to help out a buddy with his alge issue. Here is his deal: What are you thoughts?

This is awesome salt, I have been using it for about 6 months!

375 Gallon Reef Tank I sold my 180, 300, sump, and several other fish items to purchase this tank Tank Specs: Acrylic 375 Reef Ready 96x30x30 - Set-up on February 25, 2007 Lighting: 3 400W 240V 14000K MH Circulation: I have two 6100 Tunze Stream Pumps, one on each side of the overflow...

Wow this is nice, Can i post this on my club site for more people to see

I love looking at these

Thanks for the replay, I would say I have 10 at most in a 180, I also heard about boiling Vinegar .

What is the best way to get rid of them if you can not remove them from the rock or from the water, is there a reef safe injection I can use

1.Is strong light enough to keep bryopsis algae growing, the reason for asking is ever since I upgraded my lights 3years ago I have gotten this algae and it will not go away my tests are as follows PH 8.15 CA 475ppm/425ppm with Sr test KH 13.8dKH or 4.91 meq/L Mg 1260ppm Sr 10 mg/l Si 0ppm PO4...

Here is a link to there page http://www.wonbrothers.com/product/heater/ICHEATER.htm In the first set of pictures mine is the last one which has a controller that unplugs from the heater element on a standard 3 prong plug

The heater Controllers both work but the element on one does not. I am told the 1000watt element can be pluged directly into the medusa contollor, from what I read the controller for the heater and the heater part of the medusa controller are the same, so I should be able to just use the element...

I have two Won Pro-Heat Titanium 500 Watt Heaters in sumps in my garage. One of them does not work and the other one works but I have to wait for my medusa controller to turn them on then I have to go to the heater and turn the dial off then back to the temp I want to get it to heat. What I want...

I wonder if it is in a large amount then what problems would it cause, I have tons of it growing.

In Natural Reef Aquariums Book it talks about caulerpa and SPS not mixing, I also posted this on Reef Frontiers site and here is what they say, there is like to an article that I have yet to read http://www.reeffrontiers.com/forums/sho ... hp?p=34397

I was reading my Natural Reef Aquariums Book and it says that having Caulerpa in a system with SPS Corals is not a good idea, the SPS corals do not like the chemicals the caulerpa gives off. Is this true? I have been having problems with my SPS corals dying off some then growning, then dying off...