• Why not take a moment to introduce yourself to our members?

shinylights

Advanced Reefer
Location
Nyc
Rating - 0%
0   0   0
I know there are files out there on r2r, but so far, these are the dimensions of the files in that drive:
frag plug- 1 inch disk, 0.75 inch stem with 8.5mm thickness

Frag rack 1- holes are 9mm in diameter, the rack itself is 8x3 inches, it doesnt need magnets and attatches to 1/4 thick glass. the rack will be suspended 8 inches below the glass.

Torch rack: 3.5x13 inch, but meant for disks instead of plugs of 2.5 inch diameter. Includes 1 inch holes meant for aquarium magnets.

I know there are files out there but I just wanted to put this out there for money saving purposes
 

JustTechWriter

Experienced Reefer
Location
Brooklyn, NY
Rating - 0%
0   0   0
i see frag rack prices are super high for no reason, along with some other pieces, so here are the STL files to 3d print for a fraction of a cost.


if anyone wants to add their own stl files here feel free to add them, if anyone got any ideas also feel free to leave it in comments
I can only print in PLA but thanks for being awesome.
 

chemisfun11

Advanced Reefer
Location
Bellmore, NY
Rating - 100%
47   0   0
I've been 3D printing items for the reefing community for the past 5 years. Mostly light spill shades but I have developed some frag plug/mounts and holders as well. You need to use PETG which is more costly than PLA and a little trickier to dial in. Additionally, to ensure the items don't float you have to print at 100% for PETG. That takes time and more filament which increases costs. If anyone needs some help, reach out to me here or at [email protected]
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top