Temp too high

[nanchil]

You should invest on a simple controller like RKL if you dont have one. I have my heater on the controller and have fans on the controller too...

 

[Mattl22]

I'll look into one what can they do?

 

[nanchil]

I have the MH lights, heater and fan on the controller. It is programmed in such a way that if the temp goes below 76, my heater comes on, and if the temp goes above 78, the fan comes on and if the temp goes above 80, the MH goes off.

 

[Mattl22]

I need one r they expensive?


Sent from my iPhone using Reefs

 

[Mattl22]

Temp Down to 81 it looks like I lost 1 frag of purple stylo that I added yesterday I wish I had relized when I put it in yesterday that the water felt warm funny thing is that the temp is usally the first Thing I look at when I get home but it's been so consistintly within acceptable range that I guess I got lazy ! I guess I'll see the real damage when I get home today! I don't even wanna go to work today just wanna keep an eye on the tank lol! Picking up a vortex mp 40 tomorrow that will eliminate 2 power heads ! Picking up a fan today left my air on 73 so my coop won't get hotter then 73 and reset my lights to come on at 3 run til 9 so I'll be home to monitor the temp til I get a controler! Any other reccomendations?
Thanks matt


Sent from my iPhone using Reefs

 

[nanchil]

I need one r they expensive?


Sent from my iPhone using Reefs

You can buy the simplest one for $99.00. RKL (Reef Keeper Lite).

 

[pdnyc69]

go with the titanium heater. always dependable

 

[Mattl22]

Ok I'm on the train home and nervous about what the tanks gonna look like ! I'll be picking up the mp40 sat and takeing a ride to radio shack to get 2 clip on fans! I hope nothing died I now understand how a person would breakdown there tank after a crash! The thought of starting over is very overwhelming plus the devistation of all the frags / corals that you spent months tracking down and saveing for gone because a power head was giving off heat ( not carelessness on your part) really sucks!

Has anyones tank gotten this high temp and not lost things ?

Had 5 guys for lunch for the first time it was amzing!


Sent from my iPhone using Reefs

 

[THEDLO]

well?

 

[Mattl22]

I lost my new purple stylo frag I bought yesterday and my lokani frag looks like it's about to rtn other then that I think everything is fine got a fan cooling the top of the tank
Temp holding steady at 80
Total damage 2 of my favorite frags I paid 65$ for
Fish totally unaffected

 

[nanchil]

sorry to hear that you lost couple of frags... Good luck

 

[BZOFIQ]

I put my chiller in the storage as the temperature outside went down recently and boom we get 78 degree weather and my tank went from 79 to 83. I guess from now on i'll keep the chiller until November 1st. I put a bunch or RO ice-cubes and that brought it down to 71.6, if the situation doesn't improve I'm going to have to bring the chiller back. Thank god its a drop in.

 

[Mattl22]

Drop in?

 

[BZOFIQ]

Yep, drop-in. I have one of these

http://www.marinedepot.com/Aqua_Log...m_Chillers-Aqua_Logic-AL2133-FICHDICQ-vi.html

In essence instead of plumbing it in you just drop the coil into a sump in an area of high flow and you're good to go. On my 180G reef it goes on for about 90 minutes every 6 hours in the summer. When summer is gone, you just unplug it and put it away, no leaky plumbing to deal with.

 

[wayne]

Hey how high off the tank do you have the halides they should be about 12'' to 13" above if it's lower than that there's the answer to your problem....

 

[jadakiss]

i also having problems with temp. i need a new heater, i noticed eveey time my heater comes on my temp goes up.

 

[BZOFIQ]

i also having problems with temp. i need a new heater, i noticed eveey time my heater comes on my temp goes up.

That only means its working :givebeer:

 

[BZOFIQ]

but seriously....

The only way to protect yourself from faulty heaters is to plug it in through a controller. You set the temperature on your controller and set the heater 1-2 degrees higher. If your heater fails and stays on (they usually fail in ON position because the contacts weld themselves together) the controller will shut it off when pre-set temperature is reached. If your controller fails in ON position then your heater will switch off 1-2 degrees higher. If both fail in ON position I'll come over for some sea-food soup.

 

[jadakiss]

lmao

 

[greggnyce]

I thought the rent was too damn high..