• Why not take a moment to introduce yourself to our members?

Location
Huntington
Rating - 100%
391   0   0
So electric is done and ready for water! Just have a little tweaking to do and cord maintenance. Got the Apex programmed for the most part. Just need to hook up the PH probes and calibrate once water is in also need to figure where to keep the CO2 canister so it's not in the way.

Once the 80 is broken down the lights on that tank will move over to the 96.

Lot of wires!
0dbd18c11149f86376e3b41cc027f41b.jpg
949662a9874f305d629f9c5c9b17e3ee.jpg
5104f16588db2be6103052f90287f18b.jpg
cd158960489ecfd2bb1846219869bd35.jpg
b3301b281dce75068ba4f4925af2d741.jpg
367c2f9303f6d03562ae4aa8faaeee60.jpg
 
Location
Huntington
Rating - 100%
391   0   0
Thanks guys - few little issues one of the bulkheads is leaking. I drained it tightened it more and it still leaked. I took it out and looks like the rubber seal was defective. So I will get that tweaked today and fill her back up.
 
Location
Huntington
Rating - 100%
391   0   0
So its been a while since I updated, only because there has not been any updates! Just very delayed build. Few issues along the way and had to do it right. So as of today, both tanks are filled. I did have one of the tanks filled before but had to drain it out. One of the bulk heads in the sump had a bad gasket so I had to empty it out, cut it out order a new bulk head and replace. UGH.... So got everything tightened down again and now filled back up. Keep in mind one set of lights is still on the tank that is up it will more over and slid on the rack next to the existing Halide.

Few small things to do, run the ATO, hook up doser - but will knock that out tomorrow. for now.... im out!

Tried posting pics but guess its down now Taptalk is not working for me either.
 
Last edited:
Location
Huntington
Rating - 100%
391   0   0
Still slow going, cleaning and organizing. Parameters are spot on in both systems though. Gonna start moving some stuff over slowly. Still have some wire management to do as well as need to move the Halide over from the 80 once I get the 80 Emptied out.

Been trying to post some pics but apparently Tapatalk is not working again.
 

Attachments

  • thumbnail (1).jpg
    thumbnail (1).jpg
    129.8 KB · Views: 279
  • thumbnail (2).jpg
    thumbnail (2).jpg
    102.9 KB · Views: 274
  • thumbnail (3).jpg
    thumbnail (3).jpg
    62.8 KB · Views: 270
  • thumbnail (4).jpg
    thumbnail (4).jpg
    104.9 KB · Views: 266
  • thumbnail.jpg
    thumbnail.jpg
    109.2 KB · Views: 268

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top