- Location
- Hewitt NJ
This is a "Brand New" in the Box Thunder Tiger Raptor 50 Titan SE Kit Blue. I purchased it for 350.00 asking for $300.00 Firm.
I got this with all intentions of building it and flying it but unfortunately it doesn't look like ill be getting to it at this time. I want to just sell it and get my money back at this point. Like I said it's brand new in the box no assembly was started. The helicopter is located in Cliffside Park NJ (Bergen County) If you are interested please let me know. Either send me a pm through here or you can call me 201-734-1034
Thanks,
Brandon
Here are the specs on the Kit see below.
____________________________________________
This is the glow powered, Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit with Blue Color Scheme. For Advanced to Expert Helicopter Pilots 14 Year of Age and Older. FEATURES: Control System: 90? Collective Cyclic Pitch Mixing with new design for main rotor hub and mixing lever that delivers +/-15? collective pitch for very fast pitch response Autorotation Gear: Constant drive design allows aerobatics during autorotation Flapping Damper: Nonlinear for aggressive 3D flying Tail Drive: Belt type with metal guide pulleys on body and tail Tail Boom: Aluminum Body: FRP construction, painted, with decals applied, carbon fiber look canopy area Tail Rotor Blades: White plastic Vertical Fin: 3D design, constructed of carbon Aileron and Elevator Linkage: Push-pull Landing Gear: Nylon with aluminum skids Fuel Tank: 11.5oz (340cc)
INCLUDES: Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit with Body, Landing Gear, Fuel Tank and Instruction Manual
REQUIRES: Radio: At least 6-channel Servos: Four standard with digital rudder servo Gyro: Heading lock Flight Battery: 4.8V NiMH, at least 1200mAh Engine: .50 cu in heli type Exhaust: High-flow 3D type Main Blades: Carbon or fiberglass recommended Glow Fuel: Heli blend 15-30% nitro content Starting Shaft: 6mm hex size Flight Battery: 4.8V 1200mAh NiMH Electric Starter: 12V .90 size Remote Glow Starter Building and field equipment
SPECS: Fuselage Length: 48.03" (1220mm) Fuselage Width: 5.51" (140mm) Total Height: 15.75" (400mm) Main Rotor Diameter: 54.53" (1385mm) Tail Rotor Diameter: 9.33" (237mm) Gear Ratio: 8.5:1:4.56 Fully Equipped Weight: 7.5lbs (3400g)
___________________________________________________________
This is the info on the Helicopter Engine Paid 230.00 asking 200.00 firm.
I also have the engine for the helicopter. The engine is also brand new in the box (Never used/Started)
The Engine is made by the same company as the kit I talked about up top. You can also go with your own choice of engine for the helicopter if you want. There are other manufactures. [SIZE=+2]
Thunder Tiger RL .53H Ringed Red Line Series[/SIZE]
This is the RL-53H Ringed Redline Series Two Stroke Helicopter Engine from Thunder Tiger. FEATURES: CNC construction low profile cylinder head, anodized red in color Fixed type two-needle carburetor with two mounting bolts, push/pull throttle lever and heat insulator for consistent performance under different flying conditions and cowl enclosures Lightened hypereutectic machined Al-Si ringed type piston XC2 (extreme composite) cylinder liner coating with a criss-cross pattern etched on the sleeve wall Knife-edged high-strength connecting rod with bushings Redline R3 glowplug with platinum alloy filament Reinforced resin rear cage ball bearing support
INCLUDES: RL-53H Helicopter Engine with Redline R3 Glowplug, 2.5 & 3mm hex wrenches, two head shims, box wrench and instruction manual
REQUIRES: Fuel: Heli blend with 10-30% nitromethane and 20% lubricant content Glow starter, plug wrench and field equipment
SPECS: Displacement: 0.529 cu in (8.27 cc) Bore: 0.886" (22.5mm) Stroke: 0.858" (21.8mm) Practical RPM: 2,000 - 21,000 Output: 2.1 BHP/17,000 RPM Weight: 13.40oz (380g) Carburetor Settings; Needle Valve: Three turns from closed position Mixture Metering Screw: 1/12 - 1/8 turn counter-clockwise
Distance/top of cylinder head-bottom of mounting tabs: 3.1" (80mm) Distance/top of cylinder head-bottom of crankcase: 3.5" (88.5mm) Distance between mounting holes same side: 0.71" (18mm) Distance between mounting holes opposite side: 1.7" (44mm) Cylinder head width: 1.7" (44mm) Width at mounting tabs: 2.05" (52mm) Width of crankcase below mounting tabs: 1.38" (35mm) Center of engine to front bearing: 2.04" (51.7mm) Backplate to front bearing: 3" (76.2mm) Crankshaft size: 1/4-28 UNF
I got this with all intentions of building it and flying it but unfortunately it doesn't look like ill be getting to it at this time. I want to just sell it and get my money back at this point. Like I said it's brand new in the box no assembly was started. The helicopter is located in Cliffside Park NJ (Bergen County) If you are interested please let me know. Either send me a pm through here or you can call me 201-734-1034
Thanks,
Brandon
Here are the specs on the Kit see below.
____________________________________________
This is the glow powered, Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit with Blue Color Scheme. For Advanced to Expert Helicopter Pilots 14 Year of Age and Older. FEATURES: Control System: 90? Collective Cyclic Pitch Mixing with new design for main rotor hub and mixing lever that delivers +/-15? collective pitch for very fast pitch response Autorotation Gear: Constant drive design allows aerobatics during autorotation Flapping Damper: Nonlinear for aggressive 3D flying Tail Drive: Belt type with metal guide pulleys on body and tail Tail Boom: Aluminum Body: FRP construction, painted, with decals applied, carbon fiber look canopy area Tail Rotor Blades: White plastic Vertical Fin: 3D design, constructed of carbon Aileron and Elevator Linkage: Push-pull Landing Gear: Nylon with aluminum skids Fuel Tank: 11.5oz (340cc)
INCLUDES: Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit with Body, Landing Gear, Fuel Tank and Instruction Manual
REQUIRES: Radio: At least 6-channel Servos: Four standard with digital rudder servo Gyro: Heading lock Flight Battery: 4.8V NiMH, at least 1200mAh Engine: .50 cu in heli type Exhaust: High-flow 3D type Main Blades: Carbon or fiberglass recommended Glow Fuel: Heli blend 15-30% nitro content Starting Shaft: 6mm hex size Flight Battery: 4.8V 1200mAh NiMH Electric Starter: 12V .90 size Remote Glow Starter Building and field equipment
SPECS: Fuselage Length: 48.03" (1220mm) Fuselage Width: 5.51" (140mm) Total Height: 15.75" (400mm) Main Rotor Diameter: 54.53" (1385mm) Tail Rotor Diameter: 9.33" (237mm) Gear Ratio: 8.5:1:4.56 Fully Equipped Weight: 7.5lbs (3400g)
___________________________________________________________
This is the info on the Helicopter Engine Paid 230.00 asking 200.00 firm.
I also have the engine for the helicopter. The engine is also brand new in the box (Never used/Started)
The Engine is made by the same company as the kit I talked about up top. You can also go with your own choice of engine for the helicopter if you want. There are other manufactures. [SIZE=+2]
Thunder Tiger RL .53H Ringed Red Line Series[/SIZE]
This is the RL-53H Ringed Redline Series Two Stroke Helicopter Engine from Thunder Tiger. FEATURES: CNC construction low profile cylinder head, anodized red in color Fixed type two-needle carburetor with two mounting bolts, push/pull throttle lever and heat insulator for consistent performance under different flying conditions and cowl enclosures Lightened hypereutectic machined Al-Si ringed type piston XC2 (extreme composite) cylinder liner coating with a criss-cross pattern etched on the sleeve wall Knife-edged high-strength connecting rod with bushings Redline R3 glowplug with platinum alloy filament Reinforced resin rear cage ball bearing support
INCLUDES: RL-53H Helicopter Engine with Redline R3 Glowplug, 2.5 & 3mm hex wrenches, two head shims, box wrench and instruction manual
REQUIRES: Fuel: Heli blend with 10-30% nitromethane and 20% lubricant content Glow starter, plug wrench and field equipment
SPECS: Displacement: 0.529 cu in (8.27 cc) Bore: 0.886" (22.5mm) Stroke: 0.858" (21.8mm) Practical RPM: 2,000 - 21,000 Output: 2.1 BHP/17,000 RPM Weight: 13.40oz (380g) Carburetor Settings; Needle Valve: Three turns from closed position Mixture Metering Screw: 1/12 - 1/8 turn counter-clockwise
Distance/top of cylinder head-bottom of mounting tabs: 3.1" (80mm) Distance/top of cylinder head-bottom of crankcase: 3.5" (88.5mm) Distance between mounting holes same side: 0.71" (18mm) Distance between mounting holes opposite side: 1.7" (44mm) Cylinder head width: 1.7" (44mm) Width at mounting tabs: 2.05" (52mm) Width of crankcase below mounting tabs: 1.38" (35mm) Center of engine to front bearing: 2.04" (51.7mm) Backplate to front bearing: 3" (76.2mm) Crankshaft size: 1/4-28 UNF
Attachments
Last edited:
