Hi folks,
You can get the FireCracker remote PC module from X-10 for $19.95 until July 8th. It normally runs $39.95
Additionally if you use the link on my page, you can get a $15 voucher so the price of the FireCracker delivered including shipping will be about 11 bucks. If you want to avoid X10 spam, just create an email address on yahoo or Hotmail and register that address, then just monitor it for the voucher.
While you're at it, take a look at my program eLightMaster. It works with the FireCracker to provide a complete lighting solution for your tanks. I just recently added a Wave maker option that some folks are using to operate their automatic ball valves. Here are some of the features of eLight Master.
Lighting control:
* Simulate the sunrise/set patterns of any place in the world
* Simulate the moon following the sunrise/set and phase (intensity) of any place in the world
* Manual latitude/longitude entry or pick a pre configured reef.
* "Offset" your viewing period to your personal preference while still maintaining syncronization with the location you selected
* "Offset" some lamps from sunrise/set. This will allow you to stagger when they turn on and turn off
* "Bracket" the sunrise/set times to control when the lights operate at either end of the photoperiod (great for actinic dusk simulation)
* "Reverse Photo Period" allows you to have a sump or refugium lamp operate exactly opposite the main lights.
* Normal manual timer control
* Six timers
WaveMaker:
* Enable up to 6 pumps
* Set on duration for each pump
* Sequential and random operation
* Select which pumps will turn off during the night
* Tides: Enter a number between 1 and 100 in the Intensity field and during the tidal periods (2 hours around moonrise/set) the frequency of the pumps will increase that amount. Example: If all pumps are set for 4 min entering 25 will cause pumps to change every 3 min or 25% more often.
* Feed: Enter the duration in seconds for the Feed Cycle. Press the Feed Button to suspend the pump operation for the duration of the feed cycle.
* Quiet: default "dead" time between pumps. Normally set to Zero.
* Toggle: When selected this feature turns pump 1 into an independent on/off cycle. For use with the X10 Universal Module and ball valves.
Even if you don't use the wavemaker function, you can plug your pumps/powerheads
into X10 and use the Feed option. No more forgetting to turn your pumps back on after you feed your tank.
Thanks,
You can get the FireCracker remote PC module from X-10 for $19.95 until July 8th. It normally runs $39.95
Additionally if you use the link on my page, you can get a $15 voucher so the price of the FireCracker delivered including shipping will be about 11 bucks. If you want to avoid X10 spam, just create an email address on yahoo or Hotmail and register that address, then just monitor it for the voucher.
While you're at it, take a look at my program eLightMaster. It works with the FireCracker to provide a complete lighting solution for your tanks. I just recently added a Wave maker option that some folks are using to operate their automatic ball valves. Here are some of the features of eLight Master.
Lighting control:
* Simulate the sunrise/set patterns of any place in the world
* Simulate the moon following the sunrise/set and phase (intensity) of any place in the world
* Manual latitude/longitude entry or pick a pre configured reef.
* "Offset" your viewing period to your personal preference while still maintaining syncronization with the location you selected
* "Offset" some lamps from sunrise/set. This will allow you to stagger when they turn on and turn off
* "Bracket" the sunrise/set times to control when the lights operate at either end of the photoperiod (great for actinic dusk simulation)
* "Reverse Photo Period" allows you to have a sump or refugium lamp operate exactly opposite the main lights.
* Normal manual timer control
* Six timers
WaveMaker:
* Enable up to 6 pumps
* Set on duration for each pump
* Sequential and random operation
* Select which pumps will turn off during the night
* Tides: Enter a number between 1 and 100 in the Intensity field and during the tidal periods (2 hours around moonrise/set) the frequency of the pumps will increase that amount. Example: If all pumps are set for 4 min entering 25 will cause pumps to change every 3 min or 25% more often.
* Feed: Enter the duration in seconds for the Feed Cycle. Press the Feed Button to suspend the pump operation for the duration of the feed cycle.
* Quiet: default "dead" time between pumps. Normally set to Zero.
* Toggle: When selected this feature turns pump 1 into an independent on/off cycle. For use with the X10 Universal Module and ball valves.
Even if you don't use the wavemaker function, you can plug your pumps/powerheads
into X10 and use the Feed option. No more forgetting to turn your pumps back on after you feed your tank.
Thanks,
