How do you drill a tank???
- Thread starter Darkreignn
- Start date
It's definitely easiest to take it to a glass shop. 20 bucks seems to be the going rate, although I had mine done for 8 canadian
You could do it yourself with a diamond tip hole saw. The bit is about 30 bucks if you order off the net. I wouldn't try this without a drill-press though as it will take a while for the bit to go through. If your hand tilts a little while you're going through....crack
Or if you're only after a smaller hole and you have a lot of time on your hands you could bore a hole out with your Dremel tool. I did this for a small hole in a 10 gallon....don't try it on a 30 though, it'll take forever.
You could do it yourself with a diamond tip hole saw. The bit is about 30 bucks if you order off the net. I wouldn't try this without a drill-press though as it will take a while for the bit to go through. If your hand tilts a little while you're going through....crack
Or if you're only after a smaller hole and you have a lot of time on your hands you could bore a hole out with your Dremel tool. I did this for a small hole in a 10 gallon....don't try it on a 30 though, it'll take forever.
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
