Ok just finished a search on baffling a sump. None of my questions got answered so here we go. First I'm goning to use a 20gal glass tank 24x12x16. I'm going to use a 14inch baffle on the first 10 inches of the tank with a 1.5 bulkhead placed so the water level stays around 12inchs in first compartment which I'll use as a refugium, it will be piped to the return section of the sump and I'll "T" the overflow line with a ballvalve so the flow to the refugium isn't that strong. Then the main return line off the "T" overflow line will empty into the next 6 inches of the tank where my AquaC Remora will hang and Mag3 pump will sit piped to the Remora. This section will be baffled off with a 9 inch baffle then a under baffle than a 9 inch over baffle into the return section. These baffles will be about 1.5 apart. I bought .25 inch plexie glass at HD, is this ok to use as baffles and do I just use aquarium silicone to hold them in place? Thanks for any replies and sorry for the long post.
David
David
