It took a couple of hrs. to put together. I let the reactor sit overnight after I glued the acrylic to the pvc. KorbinDallas if you want to make one let me know I was thinking about making another one. I have extra pipe. I am going to make a mini with a sand filter I had lying around.
the flow is from the pump on the right to the bottom of the left chamber up through the media out and down to the right chamber, through the media and out and down to the pump. the blue line from the left chamber to the 1/2" pvc on the right is a recirc. line for the co2. the 1/2" pipe is the...
Parts and source
all pvc was purchased at lowels and home depot
2 - 4" pcv flange w/ knockouts intact
4 - 1/2" 90's
1 - 1/2" cross slip x slip x slip x slip
1 - 1/2" 90 male thread x slip
3 - 1/2"slip x 1/4"thread
2 - 1/2" ball valve
4 - 1/2" male thread x 1/2" slip
1 - 1/2" T slip x...
I finished my 1st calcium reactor a few days ago and it is filled and running. The 2 chambers and plumbing cost me around $100. The co2 tank, regulator and needle valve cost about $100 as well.
The worm looks like Eulalia viridis. From "The Modern Coral Reef Aquarium" Vol.3 it states " The basic diet for these bristle worms is dead or dying organisms (Vine, 1986), which can create some concern among aquarists. Although some species look very dangerous, they are quite harmless."
I just built a 20l refugium/sump I have my baffles on the tank drain side. You want to have enough time for the air to diffuse out of the water before you return the water to your tank. If your pump sucks air you could possibly supersaturate the water. With the baffles by the return you are...
You don't want to fowl up your tank so I would only inject a few at a time. I have waited a couple of minutes after I injected them and then pulled them out with tweezers.