Recent content by dogpoor

It's almost complete except only three 10s into a 15 tall sump. The 70W MH is the only hold up. Funds

irons in the fire

Too many irons The stand is built but not finished yet. All tanks are drilled and acrylic installed I had to order a larger tank for the sump and it should be in in the morning. The ten gallon could not take all of the back flow from the three tanks if power was lost. While awaiting the new...

I have had good luck with LFScultures. By good luck I'll say I ordered alge, rotifers, and pods and still have all my culture running a year later

Most 10 gal tanks are not tempered. I have six of them that are all drilled and tied into one system. I also have installed acrylic deviders into larger tanks to allow brood stock to be kept in one system and not fight. I take a 55gal and place a black acrylic divider, with holes drillled at...

OK you've lost it. Just get a clip on screw base light and replace the bulb. I have hundreds of shrimp that wuold fit as of now. The fuge on our 90gal is full of tiny littlle pepermint shrimp.

directly over each other. This will be a 24" wide stand with three shelfs. At this time all I have is a drawing, but the stand should be complete this week. The plant I work at has shut down till after the first.

I have been delayed while working on my mother in laws tank. We are setting up a 20gal for her for X- mas. The rest of the bulkheads came in and I have a few days off so hopefully I can get some things completed.

sweet You could market those

pump is hidden in the base of the overflow and glue is setting on the SPS tank. Next step is to cut the holes in the fuge and install some flow directing acrylic.

most filters have removable impellers in the pump take it out and clean it then try the filter to see if it works

the pump and light just showed up for the SPS tank. I'll try to work on the over flow tonight.

I use diamond points and lots of water. Go slow and us very little force.

Cut the hole in the SPS tank and installed the acrylic back, bulkhead, and stand pipe. http://i5.photobucket.com/albums/y193/d ... 0_0269.jpg Overflow will be built as soon as the Rio pump gets here.( currently sitting at FedEx in Oakland) I prevented the scratching off the glass, by the...

Oh the ideas are clicking. I entered a build off on another site and had to move in the middle of it.