Setting up Apex Help

[Custom05Taco]

I'm trying to set up the apex through a wireless connection which is not recommended, but i have no choice

 

[cmantis]

Pm me your number I can walk you through it. It needs to be wired though for setup.

 

[hijinks]

I didn't even bother with the wifi setup. I just spent $20 and got some Ethernet over power line adapters. Works great

 

[Custom05Taco]

I didn't even bother with the wifi setup. I just spent $20 and got some Ethernet over power line adapters. Works great

I was looking into them that might be the direction I need to go in

 

[Custom05Taco]

I've been trying to use this by amped wireless. (High Power
Wireless-N 600mW
Gigabit Dual Band Repeater
SR20000G) it seems to work when it wants to. I was able to program my heater and fuge light but then lost service.

 

[Custom05Taco]

What powerline adapter should I get would 200 mbps be enough or should I go for the 500 mbps

 

[hijinks]

200 is more then enough

 

[Custom05Taco]

200 is more then enough

Thanks gonna pick one up today!

 

[cmantis]

Slickdeals had them on frontpage today I believe.

 

[Custom05Taco]

I never made it out get the powerline adapter yet. But I programed my moon lights and fugelights to come on 23:00 and turn off at 2:00 it's not working any ideas?

How do I set up my ato to come on once an hour for 5min I want to start dosing kalk and don't want to screw that up.

 

[hijinks]

What does the program for the lights look like

 

[Custom05Taco]

I'm programming from the unit it self I'll take a picture

 

[Custom05Taco]

 

[Widdy]

How do I set up my ato to come on once an hour for 5min I want to start dosing kalk and don't want to screw that up.

OSC 000:00/005:00/055:00 Then ON

As for your light, make sure the current state is set to AUTO. Not sure how to view that on the display unit, I see it on the dashboard via web browser.

 

[Custom05Taco]

OSC 000:00/005:00/055:00 Then ON

As for your light, make sure the current state is set to AUTO. Not sure how to view that on the display unit, I see it on the dashboard via web browser.

 

[oh207]

How do I set up my ato to come on once an hour for 5min I want to start dosing kalk and don't want to screw that up.

If you are using a Tunze Osmolator as an ATO then be careful with powering on and off your ATO every hour. I'm using an Osmolator with Apex and each time the Apex powers on the socket for the ATO the ATO pump initializes and pumps about 10-15 seconds of water into my sump. So now I just leave the socket on all the time and let the ATO controller manage the topoff.

 

[Custom05Taco]

I

If you are using a Tunze Osmolator as an ATO then be careful with powering on and off your ATO every hour. I'm using an Osmolator with Apex and each time the Apex powers on the socket for the ATO the ATO pump initializes and pumps about 10-15 seconds of water into my sump. So now I just leave the socket on all the time and let the ATO controller manage the topoff.

I use the toms aqua lifter pump. But that's good to know thank you.

 

[Custom05Taco]

Still not working was able to get online this morning

 

[Custom05Taco]

Think I'm gonna be calling Apex when I get home. I don't see anything wrong with the way the outlets are programmed. Does anyone see something that I don't?

 

[oh207]

What's not working?