Today's Deliveries To MR Members!

[Custom King]

Hello All,

Each week MR members contact me with a wide range of requests. Here are a few of the jobs that were made and delivered to MR members this morning. First there was a pair of Frag Tanks. One with a 20" x 18" footprint and the other with a 32" x 22" footprint. Each tank had a rear left built-in overflow box. Each box was plumbed and drilled for a 1" overflow and 3/4" return with Loc-Line return spouts.

Thanks

 

[Custom King]

Hello All,

There was an MR member who needed a black ATO box. So he went for a black ATO box and matching dosing container. Both units are black and have a clear front strip for easy viewing of the liquids for a quick glance of full/empty. The dosing container is actually spit into two compartments to make it capable of holding dual liquids for dosing.

Thanks

 

[Custom King]

Hello All,

Finally I had to build a custom sump for a MR members new 300g tank. He went with a custom sump made out of clear and smoke gray material. The smoke gray is especially nice because it helps to keep down the spread of algae in your sump but also allows for nice viewing. His sump is 4 foot long which allows him room under his stand for other items such as a cal reactor, ATO box, UV, etc. His sump has dual 1 1/2" drains which run over 4 x 7" filter socks. He has a nice sized skimmer section, a huge separate refugium area and 4 baffles before his return pump to remove any micro bubbles.

Thanks

 

[jaywee]

Awesome stuff Jeff as always.

 

[jr973]

nice work pal

 

[Long-Island-Mike]

Very Nice!!

 

[Jessnuts]

Sump

How much was that sump? I was considering a custom sump for my next tank

 

[LatinP]

That's really nice clean work, hats off to you!

 

[MjG2000]

Awesome quality goods as always.

 

[jvu61]

price on a 30x 12 x 12 frag tank with the overflow

Thanks much

 

[Cave Dweller]

I like that ATO reservoir. If you could pm a price on what that ran it would be greatly appreciated.

 

[savage]

Pm...

 

[BZOFIQ]

How much was that sump? I was considering a custom sump for my next tank

Ditto, need ballpark figure for my next build.

Also, how thick of an acrylic was used on that project.

 

[jpellica]

you forgot my cube sump

Cube sump for 60 gallon cube 23X20 ATO box, fuge large skimmer area, return side with baffles and 8" overflow sock. love it Thanks Jeff

 

[ivandrago]

how much do you charge on the ATO ? Thanks.

 

[savage]

Pm...

 

[Cave Dweller]

Anyone ever hear back about the ATO reservoir?? Will send him a pm...

 

[Branespikin]

How much water does that ATO hold? Also dimensions please i am interested in something like that.

 

[savage]

Pm..